Made in high strength aluminum alloy drop profile 20×10 mm

Quickly dismantled without tools into 2 parts of 135 x 55 cm, with the help of a screwdriver the lower ends can be removed and the size can be further reduced to 120 x 55 cm.

it can be mounted in any classic L size frame, with simple modifications to the frame, it is necessary the use of some basic tools,

we advise you to contact your retailer if you if you are not familiar with mechanical work.

The 140 cm cage is suitable for the 130 cm propeller, we also recommend the use of the article propeller spacer.

Due to small differences on the frame models we offer 2 versions : TOP80 (CLASSIC), other engines (PMM)

Standard color is black, special color on request

Weight less than 1,45 Kg

The kit is supplied with the protective net already mounted.

ATTENTION PLEASE :

This article is a modification kit to transform the existing paramotor with flex cage into a rigid cage,

corresponding to the parts colored in black in the photo

IT IS NOT A COMPLETE FRAME

Assembly Instruction

The conical countersink visible in the instructions is not part of the kit, if you need it, order this item.

mounting of the 2-part 140cm cage on the Miniplane Classic chassis

From the bottom side drill 4mm, than rivet the hooks oriented as on the picture

remove the tank before drilling, to avoid damage if the drill bit slips

 

 

	to mount  the 4 fittings with 6 mm internal thread, use the 12,4 mm diameter 90° countersink,
	to make an housing 4mm deep
	You may need to gently clean the inside thread on the frame with a 10mm tap
	than use a 6Ma screw with a nut.
	to screw the fitting until it locks.
	To release the screw from the fitting, unscrew the nut slightly while holding the screw still, then you can remove the screw.